Liquid Detected in Lightning Connector?


Liquid Detected in Lightning Connector: After the iOS 10 update, iPhone users now receive a new error message saying “Disconnect the Lightning accessory. Liquid has been found in the Lightning connector.

To protect your iPhone, disconnect this Lightning accessory and let the connector dry.” This is a great warning message that could save you and your device from permanent damage. However, disconnecting the Lightning connector is not enough, there are a few other things you need to do after disconnecting the cable.

The reason why disconnecting the Lightning connector isn’t enough is the fact that this error doesn’t necessarily mean that the Lightning port is one that is wet or has traces of moisture.

It can be other lighting accessories you use. It could be a system glitch that could have caused this error. So, just to make sure everything is in the right place, you need to apply some precautionary fixing techniques to prevent further damage to the liquid.

Does Your iPhone Liquid Detected in Lightning Connector?


Your iPhone says that liquid has been detected in the lightning connector because either you have liquid in your lightning connector, or you are using the wrong lightning cable and your iPhone has a glitch telling you that indirectly your There is a problem with the lightning cable.

Sometimes instead of telling you that there is a problem with your Lightning cable, your iPhone will say that liquid has been detected in the Lightning connector, even if it is not wet.

If you see that the Lightning connector is wet, you need to drain the liquid from the Lightning connector. If the Lightning connector isn’t wet and you’re getting the error, you need to replace your Lightning cable and fix the error.

Also Read:- Do iPhone Calls Automatically End?

If There Is Water in Your Lightning Connector

If by any chance you have water on your Lightning connector, you need to drain the liquid so that you can charge your iPhone again. If you want to drain water from your iPhone Lightning connector, you will need to tap your iPhone vigorously with your hand to drain excess liquid from the Lightning connector.

Then you want to leave your iPhone in a dry place with airflow such as a window sill to dry it. After a few hours, try to charge your iPhone again to see if the liquid is detected as a lightning connector error.

Remove the Lightning Connector/charging Cable and Turn Off the Device

The most logical thing to do when you receive this warning is to unplug the lightning bolt or charging cable from iPhone. However, that alone is not enough; You will also need to turn off the device for at least an hour. Once the iPhone is turned off, put it in a dry and warm place. Do not shake your iPhone or blow into the port.

Importantly, no matter how low the battery is, do not attempt to charge your iPhone. Air-dry the electrical accessory to make sure it is properly dried before using it with any appliance.

After an hour or two, try turning on your iPhone to see if the error still appears, or try connecting an accessory to know if the error has reoccurred. If it appears then should you consider taking your iPhone to an authorized Apple Store for better advice?

Also Read:- How to Get Settings Icon Back on iPhone

Force Restart Your iPhone


As stated before, it is just a random glitch that sometimes prompts this warning. This means that nothing is wrong (as in detecting liquid), but just a glitch that can be addressed by a force restart. You can also easily try a simple restart first to see if it works.

If this doesn’t help, you can force restart your iPhone to clear any rogue apps that might have triggered this warning whenever you plug a cable into the charging/Lightning port. Here’s how to force different iPhone models to restart.

For iPhone 6 Plus and Previous Models:

Press and hold the Home and Side/Top buttons (depending on the model) for 10 seconds. Do not release them at all until the Apple logo appears on the screen.

For iPhone 7 and 7 Plus:

Press and hold the Sleep/Wake button along with the Volume Down button for at least 7-10 seconds. Don’t release them until the Apple logo appears on the screen.

For iPhone 8 or Later:

Quickly press-release the Volume Up button, then quickly press-release the Volume Down button one after the other. Once done, hold down the Sleep/Wake button until the Apple logo appears on the screen.

Also Read:- iPhone Photos Not Loading in Camera Roll?

Update Software

If you are one of those types who show reluctance to update your iPhones while updates are available then you are not doing your device any favors. Software updates not only introduce new features but also improve existing features and device performance by eliminating bugs and glitches.

So, if you are frequently getting Liquid detection alerts for no apparent reason, then you should update your iPhone immediately to resolve this issue. Here’s how you can do it.

  • Go to your iPhone’s Settings.
  • Tap on the General option.
  • Tap on the Software Update option.
  • Download and install pending updates.

Erase All Content and Settings

It shouldn’t come to this, but the last option to troubleshoot Liquid Detection alerts is to erase all content and settings. The process is simple, but it is time-consuming.

First, you will need to create a new backup so that you can recover your data after the restoration of your device. Since you have already tried the easy tricks to no avail, you have no other option but to restore your device to factory settings. Here’s how you can do it.

  • Go to your iPhone’s Settings.
  • Tap on the General option.
  • Then tap on the Reset option which is the second last option on the screen.
  • Now choose the Delete all content and settings option. Please provide a password to confirm your action.
  • Upon restart, set up your device, and don’t forget to recover data from iCloud. You can also restore your iPhone using iTunes if you can’t do it from Settings.

Also Read:- How to Approve iPhone from PC

Reset All Settings on your iPhone


Your iPhone settings may be all messed up and you won’t even know. One of the symptoms of unrelated settings is that your device starts acting strange. For example, apps crash for no reason, battery drains quickly, and warning errors don’t make sense.

So, it could also be caused by Liquid Detect alert mess-up settings. The best way to solve this problem is to reset all settings. Here’s how you can do it.

  • Go to your iPhone’s Settings.
  • Tap on the General option.
  • Then tap on the Reset option which is the second last option on the screen.
  • Now select the Reset all settings option and let your device finish the process.
  • After the system settings are reset and then configure the required options accordingly. Try plugging the Lightning cable into the charging/Lightning port and see if the warning goes away.

Final Words:

I hope you must have got the solution of Liquid Detected in Lightning Connector in this post. If you liked this post, then do not forget to publish this post on your social media platform.


Leave a Comment


Share via
Copy link
Powered by Social Snap